Identifying Your Travel Motor

Identifying Final Drives

download blank spec sheet


It’s not always easy to figure out exactly what final drive you have. These guidelines will help you correctly identify your T140, T180, or T190 final drive or your T200, T250, T300, T320 864.

 

Identifying a T140, T180, or T190 Final Drive

It can be quite tricky sometimes to correctly identify the type of T140, T180 or T190 final drive you have. Please check this carefully as you will be responsible for proper identification of your motor and any additional shipping charges if the wrong motor is shipped out.

 

Four Port Drive

Do you have only 4 hydraulic lines going to your final drive motor? If so, you have a 4 port drive. We just need one more item of information to identify the particular motor you need: do you have 12 sprocket bolts (which is actually an outdated version) or six sprocket bolts?

bobcat-t140-t180-t190-4-port-12-bolt-4-port-6-bolt

Click image to enlarge

 


Five Port Drive

If you have 5 hydraulic lines, the 5th hydraulic line can be found on the bottom of the drive on the flat cover plate that is held on by 24 bolts, as illustrated below.

 

Final Drive Travel Motor (5th hydraulic line)

Click image to enlarge

Next you need to determine if you have a SHORT 5 port or a REGULAR 5 port final drive motor. This is easy to determine with a simple measurement, as shown below.

Click image to enlarge


 

Short Nose or Long Nose T200, T250, T300, T320 864?

Sometimes it’s difficult to tell if you have a short nose or long nose final drive. This guide should help you get that figured out. Be sure to choose carefully — you will be responsible for any return shipping charges for wrong verification. What follows is a discussion of how to differentiate between the long nose and short nose final drives.

bobcat-t300-long-nose-vs-short-nose

Click image to enlarge


Measuring the Distance between Flanges

This is the best way to identify whether you have a long nose or short nose drive: look at the distance from the top of the center mounting flange to the top of the sprocket flange. For a long nose, this distance will be around 7″, but for a short nose it will be about 5 1/2″.

Final Drive-Travel Motor T300 (Long Nose - Short Nose)

Click image to enlarge

Here’s another way to determine if you have a long nose or short nose by measuring the depth of the sprocket.

Bobcat T200, T250, T300, T320, T650, and 864 Sprocket Measurement for Long Nose vs Short Nose

Click image to enlarge


 

Conclusion

If in doubt, give us a call and we can help. Many people send us a picture of their drive and we will be glad to help identify it for you.

 

final-drive-travel-motor-t300-long-nose-short-noseSave

Save

Save

Save

Save

Save